High quality polished lower switch cover. This is a carbon overlay, meant to be adhered to your original plastic lower switch cover. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. We also recommend replacing your missing or broken switch cover clips, part # 94455255700. 2 are needed per switch cover.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).

Our extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless steel brake pad wear plates are also standard on each caliper design. The opposed p...(choose a part on the right to read more)

General Fitment

The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved.

This item may ne...(choose a part on the right to read more)

High quality polished switch cover. This is a carbon overlay, meant to be adhered to your original plastic switch cover. We recommend adhering the carbon overlay to your original with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. We also recommend replacing your missing or broken switch cover clips, part # 94455255700. 2 are needed per switch cover.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be...(choose a part on the right to read more)

The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved. Sold individually.
...(choose a part on the right to read more)

Since 1984, we have established an extensive network of interior specialty vendors that have stockpiled historically correct materials and have the skills necessary to reproduce to o.e. Specifications. Each carpet set is produced in Germany and includes every concours quality detail. For vehicles with rectangular brake fluid reservoir and without intensive headlight cleaning system. Features: historically correct perlon / felt material original fitment molded / form fitted includes correct cut outs includes correct button / snap holes and velcro manufactured in Germany sold as a set of 3 pieces. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordere...(choose a part on the right to read more)

The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved.

This item may ne...(choose a part on the right to read more)

The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved. Sold individually.
...(choose a part on the right to read more)

The bbi autosport Porsche 996 & 997 streetcup roll bar features a 2-piece design and 4130 chrome moly steel tubing (1.5" x .120" main hoop & 1.5" x 0.95" rear hoops) for excellent strength to weight ratio. Taking a sensible design approach, the 2-piece construction allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory bose subwoofers. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes "x" braces on both front and rear sections and each joint has been meticulously tig welded by hand. Bolt-in installation is accomplished by usin...(choose a part on the right to read more)

Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold as a set.

Fits: GT2 (96-98), turbo (95-98), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Brakes slow your car by turning friction into heat, help remove more of that heat! These are the largest brake cooling ducts available for street use, they come from the European 911 GT2. A two piece duct, consisting of a hard plastic securing base, and a more flexible scoop on the bottom. On some applications, the wheel well liner or duct may have to be modified due to their large size. These are the largest air ducts available for a street car and they fit '98-and-up 911, and all Boxster and Cayman. Note- you need to be running a 18" or larger wheel with these ducts.
Kit consists of:

1 - g99634111790 - brake air spoiler

1 - g99634111890 - brake air spoiler

General Fitment

Included in the 356 defined are Porsche year-by-year model descriptions with attention to changes in details, both mechanical and cosmetic. The chassis number and color information, more accurate than available from the factory, is provided in easy to use charts. The text has been reviewed and approved by an impressive array of recognized 356 authorities worldwide. All models, from the commonplace to the very unusual are described and presented with full color photos of over 75 original and correctly restored 356 Porsches. Not only coupes, cabriolets and speedsters, but Carreras, america roadsters, even pushrod GTS are revealed in a way to simplify the incredibly complicated 356 lineage and nomenclature. Along ...(choose a part on the right to read more)

General Fitment

21 pieces kits also available in titan-, wood- and alu-look! * cars with airbag: please order 1 x kev 552 983 00! Kevlar-look kits give your interior the high-tech look. Installed easily. Genuine kevlar fiber. Like new

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This one-piece seal is furthest from the rear bumper, we recommend replacing this when removing the motor for maintenance. We recommend replacing both the small and large engine seals, the large is part # 91150411102 sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

High quality polished carbon dash trim piece. Great detail is taken to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon replacement for original # 964 552 232 01 01c. Sold individually.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved.

This item may ne...(choose a part on the right to read more)

The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved. Sold individually.
...(choose a part on the right to read more)

Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This replaces original number 000 044 800 63 which are no longer available. Sold as a set.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a carbon overlay, meant to be adhered to your original plastic instrument trim. We recommend adhering the carbon overlay to your original with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon overlay to be adhered to the original black plastic piece, part # 911 552 550 00 700 for reference. Sold individually.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check ...(choose a part on the right to read more)

This cassette box is complete and ready for installation. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. This is a replacement for the original part # 964 552 553 00 1db in carbon.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

High quality polished center console set that includes a polished carbon handbrake, the upper switch and lower switch covers made ready for installation. Each piece is a carbon overlay, meant to be adhered to your original plastic trim covers. We recommend adhering the carbon overlays to your originals with würth bond and seal (sold separately).

Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is a high-quality set and is made in Germany so it is made to last, like the original.

We also recommend replacing your missing or broken switch cover clips, part # 94455255700. 2 are needed per switc...(choose a part on the right to read more)

This set includes a high quality instrument surround, radio cover, ignition cover, and glove box covers. Each piece is a carbon overlay, meant to be adhered to your original plastic trim covers. We recommend adhering the carbon overlays to your originals with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold as a complete set. Please note: this is for cars with air bags!

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it canno...(choose a part on the right to read more)